• <xmp id="8i8wy">
    <menu id="8i8wy"><nav id="8i8wy"></nav></menu>

    CN
     
     
    Anti PID PID EVA film
    SV-15296P&SV-15297P
    Anti PID PID EVA film
    ? Can reduce the risk of component PID
    ? Good adhesion to TPE, PYE, KPE, TPT and other backplanes after aging
    ? Excellent weather resistance (including high temperature, high humidity, ultraviolet, etc.)
    ? Low shrinkage to ensure component stability during lamination
    ? Fast curing, improve component lamination production efficiency
    ? High light transmission to ensure the maximum output power of the module
    Message?

    sveck@sveck.com.cn

    Need Help?

    0519-82691636

     
    Product Details Other Introductions

    Technical Parameters

    modelSV-15296P/SV-15297P
    lengthCustomized according to customer requirements, between 150 meters and 400 meters
    Width / thicknessCustomized according to customer requirements

    performance

    project

    standard test

    unit

    SV-15296P

    SV-15297P

    Physical properties

    Thickness tolerance

    GB/T 6672-2001

    mm

    +/-0.05

    Width tolerance

    mm

    +5/-3

    density

    ASTM D792

    g/cm3

    0.96

    Tensile strength (after curing)

    GB/T 13022-91

    Mpa

    ≥16

    ≥16

    Elongation at break (after curing)

    %

    550

    550

    Peel strength between film and glass

    ASTM D903

    N/cm

    >60

    Peel strength between adhesive film and back sheet

    N/cm

    >40

    Thermal performance

    Shrinkage

    ASTM 1204

    MD%/TD%

    <4/<2

    Degree of cross-linking

    ASTM D2765

    %

    >75

    >75

    Electrical performance

    Volume resistivity

    GB 1410-89

    Ω.cm

    >1.0×1015

    Optical performance

    Light transmittance (after curing)

    (280-380nm)

    GB/T2410-2008%≥80≤20

    Light transmittance (after curing)

    (380nm~1100nm)

    %≥91≥91
    Weatherability

    UV aging yellowing index

    (60kWh/m2 )

    ΔYI<2

    Damp heat aging

    (DH1000h)

    ΔYI<4

     

    Lamination process

    Type

    Lamination temperature(℃)

    Vacuum time (min)

    Lamination time(min)

    SV-15296P/SV-15297P

    142-148

    5-6

    10-12

    Note: Adjust the lamination process according to the customer's lamination equipment and the requirements of the crosslinking degree.


    Packing
    ▲ The inner diameter of the paper tube is 76mm, each roll is 150m / 200m / 400m, each roll is sealed with PE film, and 9 rolls / 6 rolls / 2 rolls are placed in a carton.
    Store
    Must be stored in a dry and cool constant temperature room
    Temperature 0 ~ 30 ℃, humidity ≤60%;
    The storage period of this product is 6 months from the production date
    application
    1. Make sure to store and use EVA film in a constant temperature and humidity room.
    2. In order to avoid abnormal lamination of components due to static electricity, it is recommended to remove static electricity throughout the module.
    3. The EVA film cut into sheets should be kept sealed to avoid pollution and moisture, and related facilities should be set up to avoid mosquito pollution.
    4. It is recommended not to use each roll near the paper tube and the outermost circle.

    菲彩官网